Jump to content
  • Join SGMerc for Exclusive Perks!

    Welcome to SGMerc - the largest Mercedes-Benz site for Owner and Enthusiasts in Singapore!

    SGMerc is the official club for all current & previous owners of Mercedes-Benz cars in Singapore. SIGN UP FOR YOUR FREE ACCOUNT TODAY!

    You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join us today!

Problem with my Blackvue


ken3332

Recommended Posts

Hi bros / sis, does anyone have a solution to this park mode for Blackvue? My blackvue will shut down by itself after an hour plus when

parked. i have the powermagic Pro installed. Been to many local installer to check, but no one can slove the problem. Trying my luck here

to see if anyone have the same problem before and have it sloved?

Link to comment
Share on other sites

I actually realise that since I swapped my DR400 with the DR380, the over heating issue seems solved already. However my DR380 does shut down by itself intermittently. Can't seem to find the cycle or why it happens.

Link to comment
Share on other sites

I actually realise that since I swapped my DR400 with the DR380, the over heating issue seems solved already. However my DR380 does shut down by itself intermittently. Can't seem to find the cycle or why it happens.

Hi bros / sis, does anyone have a solution to this park mode for Blackvue? My blackvue will shut down by itself after an hour plus when

parked. i have the powermagic Pro installed. Been to many local installer to check, but no one can slove the problem. Trying my luck here

to see if anyone have the same problem before and have it sloved?

yea . mine 380hd too with power magic from group buy.. set to 24 hours and 11.8v.. first day was shutting down by itself in park mode.. 2nd day it died on me totally. so went to a 1 to 1 exchange and from the day i get the exchanged set. i will plug out the power supply whenever i reach my house void deck as already have CCTV at void deck.. to prevent it from dying from me again .. sigh..

Link to comment
Share on other sites

Have tried every possisble ways..... my last resort, to tap direct from the car battery, go through Power-magic then to the DR400. Gonna do it tmr.

Hope it will work. :)

Is your car battery voltage ok?

Cheers

I'm a MB Whore! :)

Link to comment
Share on other sites

Yes, just had it replaced last month.

IMHO!

Then should be OK!

Go ahead and tap the power directly from your battery but make sure U set your Powermagic correctly as per your mentioned settings.

For me, I threw away the Powermagic!

Reason - The DR400 is hot and imagine if U parked the car without aircon under the hot sun. Heat is always a problem to electronics and also the internal battery (very small Lithium Polymer battery)

  • Like 1

Cheers

I'm a MB Whore! :)

Link to comment
Share on other sites

IMHO!

Then should be OK!

Go ahead and tap the power directly from your battery but make sure U set your Powermagic correctly as per your mentioned settings.

For me, I threw away the Powermagic!

Reason - The DR400 is hot and imagine if U parked the car without aircon under the hot sun. Heat is always a problem to electronics and also the internal battery (very small Lithium Polymer battery)

Did the direct tap, and yes! it's workin fine now, no more shutting down problem. Thanks all for your kind advise.......:)

Link to comment
Share on other sites

Did the direct tap, and yes! it's workin fine now, no more shutting down problem. Thanks all for your kind advise....... :)

But it also means that your Blackvue won't be functioning in parking mode?

Link to comment
Share on other sites

Hi all, I also bought from the group buy. How do you know when the cam goes dead? Is it when there is no light at all? I do noticed that after a while in parking mode, it stops recording. I thought its because the motion sensor is not sensitive enough.

Link to comment
Share on other sites

Hi all, I also bought from the group buy. How do you know when the cam goes dead? Is it when there is no light at all? I do noticed that after a while in parking mode, it stops recording. I thought its because the motion sensor is not sensitive enough.

yes if theres no motion there will be no light if you disable all the led lights. but when it really goes dead like mine previous 1. the side will not have any lights even if you press it . ( i did not disable the LEDs light) or when you plug out the power and replug it back, it doesnt have any respond or light then its dead like my previous cam..

Link to comment
Share on other sites

I need a good recommendation to buy camera. Any reliable deals on now? Some idiot splash dunno what substance on my car. Think is soft drink or sth. Seep into the bonnet too. Sianz.

I am looking for 24/7 recording, probably those motion sensor kind to save on battery. I see some bros having overheating issue? Can't procrastinate liao....

Link to comment
Share on other sites

I need a good recommendation to buy camera. Any reliable deals on now? Some idiot splash dunno what substance on my car. Think is soft drink or sth. Seep into the bonnet too. Sianz.

I am looking for 24/7 recording, probably those motion sensor kind to save on battery. I see some bros having overheating issue? Can't procrastinate liao....

I'm also pondering if I should install since I always park my car indoors...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...